make your own pot feet

Designer pot feet look great but they can get expensive if you have a lot of containers. Now, while the garden is resting, is a good time to get a head start on making your own. Diane Johnson of Minnesota makes her own and saves that extra money for more plants. How? With soap molds from the craft store. You’ll also need mortar mix, vegetable oil or spray, water, a container and a stir-stick for mixing. If you want a specific color, get some concrete dye, too.

To make a set of pot feet like the one in the photo above, add water slowly to the mortar mix until it’s the consistency of a thick cake batter. Now’s the time to stir in the dye if you want colorful pot feet. Spray the mold lightly with vegetable spray and pour in the mix. Then tap it gently to get rid of air bubbles. Let the mold dry for 24 hours. If the mortar is dry to the touch, go ahead and pop the feet out of the mold. Let them cure another day or two to harden. After that, your new pot feet are ready to hold up containers.

Do you have a gardening tip? Submit it here!